Shelf

Regulated Mods

Chipsets, firing modes, screens and ergonomics of regulated mods, judged in real use rather than on the spec sheet.

Every feature on this shelf

Vaporesso mod ranges compared, GEN, Armour and Target

Each Vaporesso mod range explained from the maker's own specs, GEN, Armour, Target and the odd ones out, with who each suits and what makes it last. 10 August 2026

Regulated Mods

What is a box mod, and how to choose one that lasts

What a box mod is, why a first one should be regulated, and the parts that decide how long it lasts, from the 510 connector to the battery door. 2 August 2026

The Fumoir in brief

Here a mod is judged on what it is worth after months of use: how the chipset holds up, the quality of the contacts, the parts you can still find.

Features are written by Paul-Henri Fage.

Meet the Fumoir

The Fumoir shelves

The Fumoir overhang checker

Does your atomiser stick out past the mod? Enter both widths and the verdict appears straight away.

Atomiser diameter

Mod width at the 510 connector

Overhang per side: 1.0 mm
Verdict: Slight overhang

The atomiser sticks out a little on each side, mostly noticeable from the front.

Measure the atomiser at its widest point and the mod where the connector sits. Our reference points: up to 0.5 mm per side the pair looks flush, up to 1.5 mm the difference stays slight, beyond that it becomes marked.